The Super DriveLock eSATA Express Kit includes the basic Super DriveLock Kit as well as an external Power Supply, USB-to-S-ATA Adapter, eSATA PCI Express Controller Card and a Hard Case
The Super DriveLock is the only blocker in the market today that prevents accidental writes to Hard Drives combining so many interfaces in one single device. As stand alone or in-Bay, the Super DriveLock supports IDE 133 drives, SATA II drives with 3Gbit/sec, SCSI drives with 320 MB/sec, and USB 2.0 storage with 480 Mbit/sec.
.: Multi Media Write-Protect Support: Built-in USB 2.0, P-ATA, S-ATA and SCSI interfaces provide native write protect support for USB, P-ATA, S-ATA, and SCSI devices. Supports SCSI interfaces such as Ultra-160 and Ultra-320, including SCSI Narrow (50-pin), SCSI Wide (68-pin) and SCSI-SCA80 (80-pin). Supports 3.3v devices.
.: High Speed Operation: Transfer rates can exceed 3.5GB/min
.: Multiple O/S Host Support: Supports Windows XP, Windows VISTA and Linux.
.: Upgradeable Firmware: The unit's firmware can be easily upgraded using the PC's interface.
.: Multiple Host Interface Support: Unit can be connected to the PC or Notebook using multiple interfaces such as native S-ATA port, eSATA controllers, eSATA CardBus adapters.
.: Portable: Can be used as a portable device or mounted in a PC available drive bay.
.: HPA/DCO Support: Detects HPA and DCO areas
.: 3.3v Device Support: Provides output for devices which require 3.3v for operation.
.: Status leds: 4 leds; IDE drive detected, SATA drive detected, SCSI drive detected, USB device detected
Super DriveLock eSATA PCI Kit
Each kit includes:
(1) Super DriveLock Unit
(1) External USB Device Data Cable
(1) S-ATA Data/Power Cable
(1) 8" P-ATA /SCSI Power Cable
(1) 6" S-ATA 3.3v/5v Power Cable
(1) 6" S-ATA Data Cable
(1) 6" SCSI Data Cable
(1) SCSI Terminator
(1) 5" P-ATA Data Cable
(1) eSATA to S-ATA Data Cable
(1) USB A to A F/W Upgrade Data Cable
(1) eSATA to eSATA Data Cable
(1) 36" P-ATA/SCSI Power Cable
(1) SCSI Narrow Adapter
(1) SCSI SCA80 Adapter
(1) 18" P-ATA Data Cable
(1) External Power Supply
(1) USB to S-ATA Adapter
(1) eSATA PCI Controller Card
(1) Hard Case
Super DriveLock unit sprecifications:
.: Maximum Possible Power: 9 watts typical operating ( not including hard disk)
.: Stand by Power: 5 watts
.: Supply Voltage (DC IN): +VDC @ 2A, +12VDC @ 2A ( includes budget for hard disk)
.: Output voltage (DC OUT): +5VCD @ 1A, +12VDC @ 1A
.: Dimensions: 5.75 in. (L) x 3.25 in. (W) x 1.125 in. (H)
.: Weight: 1 lb
.: Operating temperature range: 0 to 55 degrees C (no air flow)
.: Storage temperature range: -40 to 70 degrees C
.: Relative humidity: Up to 90% (non condensing)